Roofing Waterproofing Materials Non-curing Waterproof Coating

Non-curing waterproof coating to rubber, asphalt as the main component, add additives mixed made in the use of years to maintain the viscous paste body of waterproof coating. Non-curing waterproof coating (hereinafter referred to as non-curing coating) is rubber, asphalt, softening oil as the main component, add temperature control agent and filler mixture made in the use of years to maintain the sticky paste waterproof coating. The coating can close the cracks and capillary pores of the grass-roots level, can adapt to the complex construction work surface; contact with the air after a long period of time does not cure, always maintain the characteristics of viscous gel, self-healing ability, touching that sticky, difficult to peel, in -20 ℃ still has good bonding properties. It can solve the waterproofing layer fracture caused by the cracking stress transfer to the waterproofing layer, flex fatigue or in a high stress state of early aging and other problems; at the same time, creeping material viscosity so that it can well close the grass-roots capillary pores and cracks, solve the waterproofing layer of water tampering problems, waterproofing reliability has been greatly improved; can also solve the existing waterproofing membrane and waterproof coating compound use of compatibility problem.

Non-curing waterproof coating process principle

Non-curing waterproofing coating is composed of rubber, asphalt, softening oil and temperature control agent elastic plastic gel, and air contact for a long time, but also does not cure, and has a good bond, can replace the cold adhesives for cold bonding method of construction of waterproofing materials.

Non-curing waterproof coating has the following main characteristics

(1) excellent creep performance

(2) excellent bonding properties

(3) excellent self-healing properties

(4) excellent workability of the wet base

(5)Excellent chemical resistance and aging resistance

(6)Excellent environmental performance