Bathroom Waterproofing Materials Environmentally Friendly Waterproofing Materials

Environmental protection waterproof material is a synthetic rubber or contract resin as the main film-forming substances, adding other auxiliary materials and formulated into a waterproof coating material. GS high elasticity environmental protection waterproof coating membrane is specially developed for home decoration, using high-quality modified acrylate emulsion as the base material, adding a variety of additives, filling materials, scientific processing and become a single-component high-performance waterproofing materials.

Environmentally friendly waterproofing materials performance characteristics

Construction is convenient, fast curing, high efficiency, short construction period.

Excellent aging resistance, no yellowing, non-toxic and non-hazardous, no VOC after curing, is an environmentally friendly waterproof coating film.

Excellent resistance to high and low temperatures, elasticity, elongation, water resistance and anti-cracking properties.

Good weather resistance, high temperature does not flow, low temperature does not crack, excellent anti-aging performance, oil resistance, wear resistance, ozone resistance, acid and alkali erosion resistance.

The coating film is dense, the waterproof layer is complete, no cracks, no pinholes, no bubbles, water vapor permeability coefficient is small, both with waterproof function and gas barrier function.

Strong bonding with the substrate, polymer substances in the coating film can penetrate into the substrate micro-fine seams, strong follow-up type.

Environmentally friendly waterproof material use method

Base layer treatment: the grass-roots level should be firm, flat, solid, no sharp corners, floating ash, oil and obvious water stains. Yin and Yang corners using cement mortar or sealing paste to make a rounded shape. Cracks in the substrate and the groove left by the root of the pipe should be inlaid with sealing material to deal with.

Base layer treatment agent: in order to improve the bonding force, construction should generally be painted before the grass-roots treatment agent. Grass-roots treatment agent can be used waterproof coating diluted with water on-site preparation, it is recommended that the amount of water to 50% is appropriate. Special grass-roots level can be used for special matching grass-roots treatment agent. The amount of grass-roots treatment agent about 0.3kg/m2.

Waterproof coating: 1.5mm ~ 2mm thick coating film should be divided into 3 to 4 times to paint the film, each dry before you can paint after a (generally 6 ~ 12 hours interval), each brush direction should be perpendicular to the direction of painting on a brush.

Acceptance: construction surface before the coating protective layer, must reach the full coating, thickness uniform, closed tight, no dew see white, no drum off, no cracking and warping. It is recommended that the water test be carried out after 72 hours of actual drying. Bathroom 24 hours without leakage for qualified, the level of waterproofing should check whether the drainage system is smooth with no leakage.