Waterproofing Membrane Reactive Adhesive Qaterproofing Membrane

Reactive bonding waterproofing roll-roofing material uses copolymer resin polymer (HDPE, LDPE, EVA, PVC, ECB, TPO) and other homogeneous sheet as the main waterproofing layer, in its upper surface or upper and lower surface coated with a layer of creep function of rubber asphalt self-adhesive material and then covered with silicone oil anti-adhesive barrier film made of polymer self-adhesive waterproofing roll-roofing material, can be compounded as needed on the polymer sheet fabric to strengthen the composition Polymer waterproofing roll-roofing, that is, PCM reaction bonding polymer wet laying waterproofing roll-roofing, the roll-roofing is in the PCM strong cross-film on the upper or upper and lower surface coated with a layer of creep function of rubber asphalt self-adhesive material, and then covered with silicone oil anti-adhesive barrier film made. The product is a perfect combination of PCM fast reaction bonding technology and the superior performance of PCM strong crossover membrane.

When PCM reaction bonding polymer wet lay waterproofing membrane bonded in the concrete structure layer, such as to the body for skin grafting, the formation of closed tight, high ductility, thinning, functional protection layer.

Reactive adhesive waterproofing volume product characteristics

(1) can use pre-paving counter-adhesive process, lap reliable, solve the tunnel and winter construction problems;

(2) root resistance and self-healing, and the grass-roots bonding firm, no water runoff;

(3) low requirements for grass-roots conditions, easy and fast construction;

(4) safety and environmental protection, coil width up to 2.2m.

Reactive sticky waterproof volume packaging, storage

(1) special plastic bags sealed packaging, storage in a dry, ventilated environment, to prevent sun and rain; (2) different categories, specifications should be sealed;

(2) different categories, specifications should be sorted and stacked, should not be tilted or cross-pressure; (3) the coil should be flat;

(3) coil should be placed flat, stacking height of not more than five layers;

(4) The transportation and storage process should be far from the source of fire, storage temperature should not exceed 35 ℃, storage period of 1 year.