Shandong region strong waterproof material manufacturers, waterproof coating manufacturers!

What are the damp-proof coatings for walls?

What are the wall materials for damp-proofing?

There are two ways to prevent moisture indoors. First, a damp-proof film is formed outside the damp-proof wall to block moisture intrusion. Of course, if the damp-proof film is damaged, the damp-proof effect will be lost. Second, the use of moisture-proof paint, will be long-term moisture and mold resistance. As far as water-based paint is concerned, the damp-proofing effect is very good. This kind of paint, when painted in a humid environment, can better adsorb on the wall and form a water and moisture resistant maintenance film, which is very effective.

Damp-proof coating, also called damp-proof liquid, is a more representative damp-proof coating that can effectively penetrate into the wall. After that is the transparent film, which is moisture-proof, mold-proof, hard and non-yellowing. Compared with other damp-proof brands, it is more environmentally friendly, damp-proof and long-lasting, durable and bright, easy to construct and widely used.

What are the wall materials for damp-proofing?

1. Wall damp-proof material: waterproof mortar.

Mortar damp-proof layer and wall damp-proof layer between water and dampness coated with 15-20mm thick cement mortar, and then two sides coated with asphalt.

2. Wall damp-proof material:wallpaper.

With the development of wallpaper over the years, there are also natural materials and textile wallpaper. They have a good respiratory effect on natural materials such as wood, can breathe air, moisture and mildew resistance better performance, will not happen again. There is also fabric wallpaper, made of cotton, linen, animal hair, is a cost-effective decorative choice.

3. Wall moisture-proof materials: waterproofing membrane.

Waterproofing membrane is used for walls, roads, roofs, etc. It is a flexible building material that prevents the penetration of rainwater. Depending on the material, it mainly consists of asphalt waterproofing membrane or polymer modified bitumen waterproofing membrane. It has the characteristics of water resistance and crack resistance. However, the coil will block the masonry, so it is not suitable for horizontal damp-proofing.

4. Wall damp-proofing material:sheet.

Damp-proof board is made of wood. The middle is added to the colloid, and the surface of the damp-proof board after soaking damp-proof treatment has a damp-proof layer, which can isolate the moisture in the air and better protect the wall from dampness.

5. Wall damp-proof material: tile.

Damp-proof tiles are also a good choice, with a thick glaze layer and low water absorption rate. The tiles are full of holes. These features can make the home environment more damp-proof and mold-resistant.